Captures the current theme choices in the canonical store: theme-modes/
dark.conf is Galaxy and light.conf is GrokDay, both verified identical
to their source theme files.
Both themes used bg_terminal, on the assumption the name meant "the
terminal's background". It does not -- the shared Theme struct documents
it as "For terminal output blocks (currently unused, using bg_dark
instead)". The surface grok actually paints is bg_base, so GrokDay was
rendering brighter than grok itself (#f5f5f5 vs #eeeeee) and GrokNight
darker (#0a0a0a vs #141414).
GrokDay's color15 moves from bg_storm to bg (#f5f5f5): bg_storm is now
the background, so bright white would have been invisible against it.
Audited every slot in both files against the source palettes: each value
maps to a named palette color, no text color is under 3:1 on its
background, and cursor and selection overlays clear 4.5:1.
`kitten themes` treats every .conf in <config-dir>/themes as a user
theme, which the mode system's canonical store was sitting in -- so the
picker was offering three bogus entries named light, dark and
no-preference, and had been since that store was introduced.
Move the store to ./theme-modes so ./themes means only what the kitten
means by it, and repoint apply-theme-mode.sh, the kitten shim, the
run_after hook and the test at the new path.
GrokNight and GrokDay move into ./themes with the ## name/author/
license/upstream/blurb header the kitten reads, so they now show up in
`kitten themes` and `--dump-theme` resolves them.
theme-modes/dark.conf carries the #202020 theme that was already on
disk: the file had to be re-added at its new path, so that drift comes
along with it.
Ported from grok build's TUI themes, whose palettes are defined in
crates/codegen/xai-grok-pager-render/src/theme/{groknight,grokday}.rs in
xai-org/grok-build -- they are compiled RGB constants, not extractable
from the shipped binary.
background uses grok's bg_terminal and cursor uses accent_user, which
grok sets over OSC 12 at startup, so a grok session sits flush against
the terminal. ANSI slots map onto the palette's own normal/bright pairs.
GrokNight's blue uses `blue` in both slots, as upstream TokyoNight does:
the palette's blue0 is a background blue and only reaches 2.96:1 on
#0a0a0a, which is too dim for ls output.
`chezmoi apply` on Linux printed "could not regenerate kitty theme
files" every run. GNU stat reads -f as --file-system, so
`stat -f '%Lp' file` prints a block of filesystem info to stdout and
exits non-zero. The `|| stat -c '%a'` fallback then appended the real
answer to that block, and chmod rejected the result, failing the script
under set -e.
Replace the chain with a file_mode() helper in both scripts: try the GNU
form first, since BSD rejects -c cleanly without printing anything, and
accept the answer only if it is octal. Covered by a new case in
tests/test_theme_mode.sh using a stat stub that reproduces GNU's
behaviour; it fails against the old chain.
theme-mode is a per-machine preference, and the three *-theme.auto.conf
files are generated from it plus themes/, so tracking any of them made
every machine flag the others' choice. Drop all four from the source
state and ignore them.
That leaves a freshly applied machine with no theme files for kitty to
read, so add run_after_kitty-theme-mode.sh to regenerate them from the
canonical themes. It defaults to `auto`, so a new machine follows its OS
until told otherwise, and it exits quietly where this kitty config isn't
applied rather than failing the run.
Since that script now runs on every apply, including on Linux, make the
permission lookup in both shell scripts fall back from BSD `stat -f` to
GNU `stat -c` and then to 600.
Captures the current mode. The two generated theme files now hold the
dark theme because the mode is pinned; themes/light.conf still has the
light theme, so `theme light` and `theme auto` restore it.
kitty gives *-theme.auto.conf priority over everything -- includes and
even --override -- and has no option to stop following the OS. So the
only way to start in a chosen mode is to control what those files
contain. Make them generated:
themes/{light,dark,no-preference}.conf canonical, the real themes
theme-mode auto | light | dark
apply-theme-mode.sh writes the three .auto.conf
Under `auto` each appearance keeps its own theme, so kitty follows the
OS as before. Pinned, all three get the pinned theme, so kitty starts in
it whatever the OS says and a config reload no longer resets it.
`theme` now records the mode and reloads instead of calling set-colors,
which is why the setting survives restarts. A bare `theme` records
`auto` rather than pinning when the toggle lands on the macOS
appearance, so nothing is pinned unless it actually differs.
The kitten shim hashes the automatic theme files before running `kitten
themes` and copies whichever changed into themes/, so picking a new
light theme while pinned to dark is kept and applied on the next switch.
Covered by tests/test_theme_mode.sh.
conf.d/kitty_theme.fish is gone: theme-mode is now the source of truth,
so the universal-variable tracker it maintained is redundant.
__kitty_tab_set sent a luminance-picked black/white active_fg, so a
tinted tab's title looked different from a normal one. Send NONE
instead: tab_fg() then falls back to the shared active foreground (the
theme background) while active_bg keeps the per-host tint.
Covered by a new case in tests/test_tab_bar_colors.py matching what
__kitty_tab_set actually sends — host background, no fg override.
a68b138 made draw_tab() derive all four color roles from tab_colors(),
so it stopped reading the per-tab colors that `kitten @ set-tab-color`
sets. The ssh wrapper (__kitty_tab_set) still set them, but the renderer
discarded them and every remote tab drew in the #2e84e6 accent.
Resolve the drawn colors through DrawData.tab_fg/tab_bg on the already
role-substituted title_draw_data: those return the per-tab override when
one is set and the accent roles otherwise. Theme-provided tab colors
still cannot leak in, so the theme-independence fix is preserved.
Extend tests/test_tab_bar_colors.py with the override case; it fails
against the old renderer (got the accent, wanted the host color).
`theme` switches kitty between the existing dark-theme.auto.conf and
light-theme.auto.conf via `kitty @ set-colors --all --configured`, so it
stays in sync with whatever `kitten themes --light/--dark` selects.
Subcommands: light, dark, auto (hand control back to the OS appearance
via load-config), status.
Tide is resynced by calling __tide_apply_terminal_appearance directly,
so the prompt recolors even if kitty sends no palette-change
notification for a dynamic color change. conf.d/kitty_theme.fish tracks
$fish_terminal_color_theme into $kitty_theme_mode so the toggle still
reads the real state after kitty follows an OS appearance change.
light-theme.auto.conf had no tab colors, which left the dark tab bar on
a light background after switching; add a matching tab style block.
Tint the kitty tab background by target host so local vs remote (and
which remote) is visible at a glance.
- __kitty_host_color: explicit color table for known hosts (routers,
resolvers, ryzen/mini, personal cloud, geo VPS) + stable hashed
palette fallback; auto-picks readable fg by luminance
- __kitty_ssh_host: parse target host from ssh/mosh-style argv
- __kitty_tab_set/__kitty_tab_reset: active tab = full host-color bg,
inactive tab = dark theme bg with host-color text; revert on exit
- ssh wrapper + s (kitten ssh) and m (mosh) wired to tint/reset
Also includes unrelated pending dotfile changes (GH MCP PAT from
keychain in fish/zsh, kitty/wezterm font_size 15->14, kitty
colorspace displayp3) committed together at user request.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
